Back to top
Send SMS Send Inquiry
Digital Table Top UTM

Digital Table Top UTM

100000.00 - 200000.00 INR/Piece

Product Details:


Price And Quantity

  • 100000.00 - 200000.00 INR/Piece
  • 1 Piece

Trade Information

  • Kolkata
  • 1 Piece Per Month
  • 1 Months
  • All India

Product Description

Digital Table Top UTMs

Ctronix brand, Digital Table Top UTM is designed to accurately measure the tensile /compressive strength along with elongation of samples at a Constant Rate of Elongation (CRE) machine. 

A one of its kind Digital (Microprocessor based) Table-Top Universal Testing Machine capable of:

  • Measuring the break force with an accuracy +/- 0.5% and resolution of 0.1 Kgf.
  • Measuring elongation with an accuracy of +/- 1.0%
  • Displaying in real time the load and elongation.
  • Auto holds the peak force and the elongation.

Video : 

The video shown above is for a compressive force tester, but the tensile strength testers are of similar accuracy and similar operating procedures. 


  • User needs to manually place the sample between the jaws.
  • The operator then needs to press the START Button and the following steps are performed   
    • The sample is stressed / compressed at a constant rate.
    • Real time display of compression / tensile force till break (in case of tensile tests system also displays the elongation)  
  • On Detection of break
    • The machine stops.
    • The display freezes with the break force. (in case of tensile tests system also displays the elongation) .
TECHNICAL SPECS (Can be made to suit your requirements)




0 - 500 Kgf (5KN)

Load resolution

0.1 Kgf

Load accuracy

+ / - 0.5%

Sample Length

50 - 200 mm. (can be changed)

Sample Width

60 mm. (variable)

Jaw travel (Minimum
Maximum Separation)
Minimum : 50 mm
Maximum : 700 mm. (can be modified on request)

Jaw travel speed

250 mm. /minute (can be adjusted 5, 25, 50, 250 and 500 mm.)

Jaw travel resolution

1 mm

Jaw travel accuracy

+/- 1%.

Linear Guide/Slide accuracy

0.1 m.m. over 300 m.m


Digitally controlled Motor


< 10mn deg.

Side play.

< 0.1 m.m.

Stopping the machine on break

Automatic on break

Jaw return to test position , preset by the operator.

On reset

The force can be displayed in Kg. force or Newton as per your choice and reporting capabilities tailor made to your requirements


  • Crushing strength of Sintered iron ore pellets
  • Crushing strength of activated charcoal balls.
  • Tensile strength and elongation of rubber. 

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Table Top - Pencil Type UTM' category

Contact Details
AN ISO 9001:2008 COMPANY
BNo 37A ,CHAKRABERE LANE,Kolkata - 700003, West Bengal, India
Phone :08037265601
Mr Prabir Kumar Sircar (Proprietor)
Mobile :08037265601
Mr. Shome Shankar Sircar
Mobile :08037265601
Send SMS Send Inquiry