MF Digitiser
Ctronix Micro-Film Digitizer has the following specs
The Image capture system, is capable of digitizing both 16mm and 35mm films. To change the film size, the rollers and spools have to be changed by the operator. The settings of the capturing device and the lens also have to be changed. (Approx. time required for change over from one size to the other is about 10 minutes.).
The frames are advanced manually by the operator with a knob and the operator has to position each frame at the proper place in the light window, looking at the image of the frame in the monitor window. Approx. 15 frames can be digitized per minute.
The light used is special photo light emitting perfect white light to enhance the contrast of the contents. The light source is provided with a brightness control to cater for different film opaqueness. The brightness of the light source has to be controlled manually by the operator, prompted by the capturing device. The light source has a guaranteed life of 1000 hours.
Picture below is a sample of printing two pages of a newspaper from 35 mm micro film.
|
![]() |
C TRONIX
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |